(6" x 2.75") Latch Protector LP255 with large cutout 3/8" offset


Latch Protector products are made using high quality materials. Latch Protector LP255 Series latch protectors are manufactured using heavy 12 gauge steel for maximum security. Features Special fasteners which allow for a quick and easy flush, inside installation.

   Latch Protector steel plates completely cover the latch area protecting the latch bolt. 6" x 2-3/4" steel plate with 3/8" offset. Carriage bolts and special fasteners must be installed by drilling two holes in the door. For outward swinging commercial doors. Plate: 12 gauge steel, 2 square holes in plate. . Bolts: Two 5/16-18 carriage bolts 1-1/2" long with special fasteners.

LP255 Latch Protector features a large cutout to allow for installation with knob and rose diameter up to 3"

SPECIFICATIONS: Plate: 12 gauge steel, .105" thick. Two square holes in plate. 3/8" in from top and bottom, and 3/4" in from side and 3/8" offset. Bolts: Two carriage bolts 5/16-18 x 1-1/2" long with special fasteners.  Finish: Zinc plated with brushed finish. Latch Protector products are made using high quality materials. 

Installation Instructions

Recently Viewed Designs