Latch-Gard LG160Z Latch Guard, 2-5/8 x 12 Inch, Outswing Aluminum Door, 12 Gauge Steel, Zinc Plated

Latch-Gard LG160Z is a 2-5/8 x 12 inch latch guard with a 7/32 inch offset for out-swinging aluminum entrance doors. A 1-1/2 inch cylinder hole fits over the cylinder. The plate covers the latch area so the latch bolt cannot be retracted. Made in the USA.

• Model: LG160Z
• Plate: 2-5/8 in wide x 12 in high, 12 gauge steel, 0.105 in thick, 7/32 in offset, two square holes
• Finish: zinc plated, brushed
• Mounting holes: 10-3/4 in center to center
• Door: out-swinging aluminum entrance doors, 1-3/4 in thick
• Lock: Adams Rite type locks. Best fit is a 1-1/8 in backset. Also fits 31/32 in and 1-1/2 in backsets by shifting the guard horizontally
• Handing: reversible for right or left openings
• Install: drill two holes in the door
• Hardware: two 5/16-18 x 1-1/2 in carriage bolts with SF710 tamper-resistant flush fasteners